HP 6125XLG Layer 3 - Ip Routing Configuration Manual page 271

Peer
2.2.2.2
The output shows that Switch C has established an IBGP peer relationship with Switch B.
3. Configure EBGP:
# Configure Switch A.
<SwitchA> system-view
[SwitchA] bgp 65008
[SwitchA-bgp] router-id 1.1.1.1
[SwitchA-bgp] peer 3.1.1.1 as-number 65009
[SwitchA-bgp] address-family ipv4 unicast
[SwitchA-bgp-ipv4] peer 3.1.1.1 enable
[SwitchA-bgp-ipv4] network 8.1.1.0 24
[SwitchA-bgp-ipv4] quit
[SwitchA-bgp] quit
# Configure Switch B.
[SwitchB] bgp 65009
[SwitchB-bgp] peer 3.1.1.2 as-number 65008
[SwitchB-bgp] address-family ipv4 unicast
[SwitchB-bgp-ipv4] peer 3.1.1.2 enable
[SwitchB-bgp-ipv4] quit
[SwitchB-bgp] quit
# Display BGP peer information on Switch B.
[SwitchB] display bgp peer ipv4
BGP local router ID : 2.2.2.2
Local AS number : 65009
Total number of peers : 2
Peer
3.3.3.3
3.1.1.2
The output shows that Switch B has established an IBGP peer relationship with Switch C and an
EBGP peer relationship with Switch A.
# Display the BGP routing table on Switch A.
[SwitchA] display bgp routing-table ipv4
Total number of routes: 1
BGP local router ID is 1.1.1.1
Status codes: * - valid, > - best, d - dampened, h - history,
Network
AS MsgRcvd
65009
AS MsgRcvd
65009
65008
s - suppressed, S - stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
NextHop
259
MsgSent OutQ PrefRcv Up/Down
2 2 0
Peers in established state : 2
MsgSent OutQ PrefRcv Up/Down
4 4 0
2 2 0
MED LocPrf
State
0 00:00:13 Established
State
0 00:02:49 Established
0 00:00:05 Established
PrefVal Path/Ogn