HP 6125XLG Layer 3 - Ip Routing Configuration Manual page 252

Step
2. Enter BGP view or BGP-VPN
instance view.
3. Enter BGP IPv4 unicast
address family view or
BGP-VPN IPv4 unicast
address family view.
4. Save all route updates from
the peer or peer group.
To save all route updates from the specified peer or peer group (IPv6):
Step
1. Enter system view.
2. Enter BGP view
3. Enter BGP IPv6 unicast
address family view.
4. Save all route updates from
the peer or peer group.
Configuring manual soft-reset
To configure manual soft-reset (IPv4):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
Command
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
address-family ipv4 [ unicast ]
peer { group-name | ip-address }
keep-all-routes
Command
system-view
bgp as-number
address-family ipv6 [ unicast ]
peer { group-name |
ipv6-address } keep-all-routes
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
240
Remarks
N/A
N/A
By default, the routes are not
saved.
This command takes effect only on
the routes received after this
command is executed.
Remarks
N/A
N/A
N/A
By default, the routes are not
saved.
This command takes effect only on
the routes received after this
command is executed.
Remarks
N/A
N/A