HP 6125XLG Layer 3 - Ip Routing Configuration Manual page 319

Blade switch
Hide thumbs Also See for 6125XLG:
Table of Contents

Advertisement

[SwitchA-bgp-ipv6] quit
[SwitchA-bgp] quit
# On Switch D, create routing policy frr to set a backup next hop 2002::1 (Switch C) for the route
destined for 1::/64, and apply the routing policy to BGP FRR for BGP IPv6 unicast address family.
<SwitchD> system-view
[SwitchD] ipv6 prefix-list abc index 10 permit 1:: 64
[SwitchD] route-policy frr permit node 10
[SwitchD-route-policy] if-match ipv6 address prefix-list abc
[SwitchD-route-policy] apply ipv6 fast-reroute backup-nexthop 2002::1
[SwitchD-route-policy] quit
[SwitchD] bgp 200
[SwitchD-bgp] address-family ipv6 unicast
[SwitchD-bgp-ipv6] fast-reroute route-policy frr
[SwitchD-bgp-ipv6] quit
[SwitchD-bgp] quit
Verifying the configuration
# Display detailed information about the route to 4::/64 on Switch A. The output shows the backup next
hop for the route.
[SwitchA] display ipv6 routing-table 4:: 64 verbose
Summary Count : 1
Destination: 4::/64
Protocol: BGP4+
SubProtID: 0x2
Cost: 0
IpPre: N/A
Tag: 0
OrigTblID: 0x0
TableID: 0xa
NibID: 0x25000003
AttrID: 0x3
Flags: 0x10060
Label: NULL
BkLabel: NULL
Tunnel ID: Invalid
BkTunnel ID: Invalid
FtnIndex: 0x0
# Display detailed information about the route to 1::/64 on Switch D. The output shows the backup next
hop for the route.
[SwitchD] display ipv6 routing-table 1:: 64 verbose
Summary Count : 1
Destination: 1::/64
Protocol: BGP4+
SubProtID: 0x1
Process ID: 0
Age: 00h00m58s
Preference: 255
QosLocalID: N/A
State: Active Adv
OrigVrf: default-vrf
OrigAs: 200
LastAs: 200
Neighbor: 3001::2
OrigNextHop: 3001::2
RealNextHop: 3001::2
BkNextHop: 2001::2
Interface: Vlan-interface 100
BkInterface: Vlan-interface 200
Process ID: 0
Age: 00h03m24s
307

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5920 series5900 series

Table of Contents