Drive Components Assembly Replacement
About
This procedure provides instruction to remove and install the Drive Components Assembly.
The Drive Components assembly consists of the Step-up Pulley and Tensioner assembly and
Generator and Eddy Brake assembly.
Procedure
Review entire procedure before starting.
Removal Instructions
1. Remove the Drive Access cover, see
2. Remove the left and right Drive Disk covers, see
page 57.
3. Remove the Stairarms and Drive Housing covers, see
ment" on
page 59.
Experience Series 800 Line EFX
Drive Components Assembly Replacement
"Drive Access Cover Replacement" on
"Drive Disk Covers Replacement" on
"Drive Housing Covers Replace-
5 Replacement Procedures
page 56.
86