Procedure - Precor Experience Series 800 line EFX Service Manual

Procedure

Review entire procedure before starting.
Removal Instructions
1. Remove the drive access cover, see
2. Remove the right and left drive disk covers, see
page 57.
3. Remove the right Stairarm, see
4. Use a 1/2" socket to loosen the two Generator and Eddy Brake Assembly and the two
Drive Components Assembly fastener nuts (left side). Loosen nuts enough to allow
movement but keep the carriage bolt heads inserted into the adjustment slots. Do not
remove the fastener nuts.
5. Use a 1/2" socket to loosen first stage belt tension and walk the first stage drive belt off
the pulleys. Remove the first stage drive belt.
Experience Series 800 Line EFX
"Drive Access Cover Replacement" on
"Drive Disk Covers Replacement" on
"Stairarm Replacement" on
5 Replacement Procedures
Second Stage Drive Belt Replacement
page 117.
page 56.
73