3 Standard Service And Diagnostics Menus; About; Service Access Codes - Precor Experience Series 800 line EFX Service Manual

3 Standard Service and Diagnostics Menus

About

There are three Standardized Service and Diagnostics menus used across Precor cardio
product lines providing equipment usage information, club settings, and machine service dia-
gnostic tests:
Hardware Validation (5,1,7,6,5,7,6,1) is a set of automated diagnostic tests and hard-
l
ware calibration routines used to troubleshoot and verify machine operation.
Club Settings (5,6,5,1,5,6,5) also referred to as Club Parameters used to manage and
l
customize user machine workout limit parameters. On touchscreen consoles, machine
usage information and error event code data is included.
Information Display (6,5) provides software information, machine usage information,
l
and error event codes. Only supported on P10, P20, and P30 consoles.
The service and diagnostics menus are accessed by entering the standardized service access
code. The user interface and service menu capabilities will vary based on the console model
and type of exercise equipment. consoles that currently support standardized service modes
include:
Non-touchscreen consoles: P10, P20, and P30
Touchscreen consoles:

Service Access Codes

The following table lists the available standardized service menus and access codes:.
SERVICE
ACCESS CODE
5,1,7,6,5,7,6,1
5,6,5,1,5,6,5
‡
6,5
1) On P62, P80, and P82 consoles, the Information Display (6,5) data is also included in Club Set-
tings (5,6,5,1,5,6,5).
2) The Information Display (65) is not supported on the P62, P80, and P82 consoles, access Club
Setting (5,1,7,6,5,7,6,1) to access similar data.
Experience Series 800 Line EFX
P62, P80, and P82
SERVICE MENU
Hardware Validation
Club Settings
Information Display
3 Standard Service and Diagnostics Menus
FUNCTION
Diagnostic tests.
Configure machine and workout
(1)
parameter limits
View usage stats, HW/SW con-
nectivity, and error code inform-
(2)
ation .
About
.
13