Procedure - Precor Experience Series 800 line EFX Service Manual

Procedure

Review entire procedure before starting.
Removal Instructions
1. Remove the drive access cover, see
2. Remove the right and left drive disk covers, see
page 57.
3. Remove the right Stairarm, see
4. Use a 1/2" socket to loosen the two Drive Components Assembly fastener nuts (left
side)enough to allow movement. Do not remove the fastener nuts.
5. Use a 1/2" socket to loosen first stage belt tension and walk the first stage drive belt off
the pulleys. Remove the first stage drive belt.
Experience Series 800 Line EFX
"Drive Access Cover Replacement" on
"Drive Disk Covers Replacement" on
"Stairarm Replacement" on
5 Replacement Procedures
First Stage Drive Belt Replacement
page 56.
page 117.
68