Lift Motor Replacement
About
This procedure provides instruction to remove and install the Lift Motor.
Specifications
System Component
Lift Motor Calibration Distance*
Yoke/Ramp Fasteners
Note: * Calibration distance is set at incline level 10.
Lift motor power
Lift motor power is provided by the battery thru the lift motor fuse located on the
see
"LPCA Fuse Locations" on
Procedure
Review entire procedure before starting.
1
Lower PCA board
Experience Series 800 Line EFX
9 in
320 in-lbs ( 236.2 Nm)
page 107.
5 Replacement Procedures
Lift Motor Replacement
Specification
LPCA
1
board,
99