Information Display - Precor Experience Series 800 line EFX Service Manual

MAINTENACE MENU
» Next Maintenance
Due
Active Status Light
(ASL) menu
» AS light Brightness
» Maintenance
Reminder

Information Display (65)

Service Access Code: 6,5 (see
The Information Display is only supported on P10, P20, and P30 consoles. On P62, P80, and
P82 consoles, refer to Club Settings for similar information.
Experience Series 800 Line EFX
Range: 10 - 0 (10- New condition, 0 or 1 - Replace running belt)
A belt rating of 0 or 1 will cause a blue pulsing ASL light indicating
that there is a problem with the running belt/deck and is in need of
servicing or replacement.
menu: Maintenance > Recommended Action > Next Main-
tenance Due
Provides machine maintenance status:.
menu: Maintenance > Active Status Light
Indicates the machine operating and maintenance status, see
Active Status Light (ASL)" on
Blue Solid: Normal operation Indicates that the ASL has not
detected any logged error codes.
Blue Pulsing: Preventative maintenance reminder.
• Treadmills: A belt rating of 0 or 1 will cause a blue pulsing ASL
light indicating that there is a problem with the running belt/deck
and is in need of servicing or replacement.
• ALL : The maintenance counter starts at 1000 hours counting
down to active use hours to 0 indicating preventative maintenance
is due.
Yellow Solid: Indicates an error has occurred, was self-corrected
and the machine can be used. The fault can be cleared.
Yellow Pulsing There is a current non-recoverable fault con-
dition, there is a loss of a major function and the machine id out-of-
service. Machine service is required.
menu: Maintenance > Active Status Light > AS Light Bright-
ness
Range: low, medium, bright
Adjust the ASL brightness level.
menu: Maintenance > Active Status Light > Maintenance
Reminder
Range: OFF/ ON (default)
Switch the maintenance reminder function ON or OFF.
"Service Access Codes" on
3 Standard Service and Diagnostics Menus
DESCRIPTION
page 133.
page 13)
Information Display (65)
"
28