Fixed Arms Replacement; About; Procedure - Precor Experience Series 800 line EFX Service Manual

5 Replacement Procedures

Fixed Arms Replacement

Fixed Arms Replacement

About

This procedure provides instruction to remove and install the Fixed Arms.
Specifications
Specification
System Component
300 in-lbs (34 Nm)
Set Screw Fastener
25 in-lbs (2.8 Nm)
Flat Head Screw Fastener

Procedure

Review entire procedure before starting.
Removal Instructions
Repeat this procedure for both the right and left Fixed Arms.
1. Remove the Top Lift cover, see "Front Lift Cover Replacement" on page 49.
Experience Series 800 Line EFX 112