Drive Access Cover Replacement - Precor Experience Series 800 line EFX Service Manual

Drive Access Cover Replacement

Drive Access Cover Replacement
ID
Drive Access Cover
Drive Top Cover
Removal Instructions
1. Use a #3 Phillips screwdriver to remove the two fasteners located at the bottom of the
drive access cover
remove. Retain fastener hardware for installation.
Installation Instructions
1. Slide the top of the drive access cover
then pressing the cover into position over the access cover opening.
2. Secure cover with the two # 3 Phillips screw fasteners.
Experience Series 800 Line EFX
Description
. Slide the access panel downward and away from the frame to
Covers and Panels Replacement
under the lip of the drive top cover
5 Replacement Procedures
and
56