Moving Arms Replacement
About
This procedure provides instruction to remove and install the Moving Arms.
Specifications
System Component
Link Arm Fastener
Procedure
Review entire procedure before starting.
Removal Instructions
Repeat this procedure for both the right and left Moving Arms.
1. Remove the Top Lift cover, see
2. Remove the #2 fastener and the Moving Arm - Outer Linkarm cover.
Experience Series 800 Line EFX
300 +/- 90 in-lbs (34 +/- 10 Nm)
"Front Lift Cover Replacement" on
5 Replacement Procedures
Moving Arms Replacement
Specification
page 49.
114