Asl Functions - Precor Experience Series 800 line EFX Service Manual

ASL State
Yellow Pulsing There is a current non-recoverable fault condition, there is a loss of a major func-
tion and the machine is out-of-service. Machine service is required.

ASL Functions

Setting the ASL light brightness level
The ASL Light Brightness level settings are HIGH, MEDIUM, and LOW. On P10, P20, and
P30 consoles, the light brightness level can be switched OFF.
On P10, P20, and P30 consoles, the OFF setting switches the ASL light brightness OFF
l
for all ASL state conditions. Setting the ASL Light Brightness OFF only switches the
ASL light brightness OFFand not the ASL active status functionality.
Regardless of the brightness level setting (including OFF), you can view the current
l
ASL state (blue, yellow, etc) in the service access menus, see
state" on the facing
P10, P20, and P30 consoles:
Access Hardware Validation ( 5,1,7,6,5,7,6,1) > AS LIGHT BRIGHTNESS > select HIGH,
MED, LOW, or OFF.
P62, P80, and P82 consoles:
Access Club Settings (5,6,5,1,5,6,5) > Maintenance menu > AS LIGHT BRIGHTNESS >
select HIGH, MED, or LOW.
Disabling the ASL Maintenance Reminder
When set to ON, the ASL maintenance reminder - pulsing blue light state is triggered ON
when the maintenance counter counts down to zero miles (or zero hours). When set to OFF,
the ASL Maintenance Reminder counter is ignored and the ASL state is not changed to
pulsing blue.
The "OFF" setting effectively disables the ASL "blue pulsing" state without affecting the
l
yellow or pulsing yellow fault states.
When set to OFF, the Maintenance Reminder counter continues counting down the
l
miles (or hours) remaining which can be viewed in the service access menu, see
ing the current ASL state" on the facing
Error code events will still affect the ASL state condition even when the Maintenance
l
Reminder is set to OFF.
P10, P20, and P30 consoles:
Access Club Settings (5,6,5,1,5,6,5) > MAINT CONFIG > select ON or OFF.
Experience Series 800 Line EFX
page.
page.
DESCRIPTION
"Viewing the current ASL
6 Troubleshooting
Active Status Light (ASL)
"View-
136