Drive Disk Covers Replacement
Drive Disk Covers Replacement
ID
Drive Disk Cover - right
Drive Disk Cover - left
Removal Instructions
Repeat this procedure for both the right and left drive disk covers.
1. Remove the drive access cover, see
vious
page.
2. Use the crankarm to rotate the drive disk cover (
the mounting bracket and the #2 Phillips screw fastener (there is an indent in the upper
inside of the drive housing cover). Use a #2 Phillips screwdriver to remove the fastener
(one screw per side). Retain fastener hardware for installation.
Experience Series 800 Line EFX
Description
"Drive Access Cover Replacement" on the pre-
5 Replacement Procedures
Covers and Panels Replacement
right,
right) to provide access to
57