Procedure 2.1 - Accessing The Hardware Validation Program - Precor C534i Service Manual

Procedure 2.1 - Accessing the Hardware Validation Program

The EFX diagnostic software cycles through the following tests:
Hardware Validation
Display Test
Keyboard Test
Heart Rate
Brake
RPM
Battery
Procedure
1. This is a self powered unit, to power the EFX it must be pedaled or the external power
supply must be equipped.
Note:
Use the RESET key and the ten key keypad to enter the access code.
Access the diagnostic program by pressing, keys RESET,5,1,7,6,5,7,6,1, sequentially.
2.
Diagram 2.1 - C534i Display
Arrow Keys
C534i Elliptical Fitness Crosstrainer
OK Key
Cancel Key
Page 6