Procedure 2.2 - Accessing The Information Display - Precor C534i Service Manual

Procedure 2.2 - Accessing the Information Display

Procedure
1. This is a self powered unit, to power the EFX it must be pedaled or the external power
supply must be equipped.
With the PRECOR EFX banner displayed, press keys RESET,6,5, sequentially.
2.
Diagnostics Test
Odometer
Hour meter
U-Boot Software version
U-Base Software version
Lower software version
Metrics Board SW Part Number
Serial Number
Usage Log
Error log
The test name DIAGS - INFORMATION DISPLAY will scroll once across the display. Press
4.
the OK key to proceed to odometer or use the
The display name "ODOMETER" will be displayed, press the OK key, the odometer value
4.
will be displayed, as total strides accumulated.
Press the CANCEL key to proceed to the hour meter display.
5.
The display name "HOUR METER" will be displayed, press the OK key, the hour meter will
6.
be displayed, as the total number of hours of use. Fractional parts of an hour are stored
internally, the display will be truncated to the nearest full hour.
Press the CANCEL key to proceed to the U-Boot software version display.
7.
The display name "U-BOOT SW" will be displayed, press the OK key, the U-Boot software
8.
part number will be displayed.
Press the CANCEL key to proceed to the U-Base software version display.
9.
10. The display name "U-BASE SW" will be displayed, press the OK key, the U-Base software
part number will be displayed.
11. Press the CANCEL key to proceed to the lower software version display.
12. The display name "LOWER SW" will be displayed, press the OK key, the lower software
part number will be displayed.
13. Press the CANCEL key to proceed to the metrics board software version display.
C534i Elliptical Fitness Crosstrainer
, keys to proceed a different display.
Page 9