Procedure 2.2 - Accessing The Information Display - Precor C532i Service Manual

Procedure 2.2 - Accessing the Information Display

Procedure
1. With the PRECOR EFX banner displayed, press keys RESET,6,5, sequentially.
Diagnostics Test
Odometer
Hour meter
U-Boot Software version
U-Base Software version
Lower software version
Metrics Board SW Part Number (C532i only)
Serial Number
Usage Log
Error log
2. The test name "DIAGS - INFORMATION DISPLAY" will scroll once across the display.
Press the OK key to proceed to odometer or use the
display.
3. The display name "ODOMETER" will be displayed, press the OK key, the odometer value
will be displayed, as total strides accumulated.
4. Press the CANCEL (C532i) or the BACK (C556i Navy) key to proceed to the hour meter
display.
5. The display name "HOUR METER" will be displayed, press the OK key, the hour meter will
be displayed, as the total number of hours of use. Fractional parts of an hour are stored
internally, the display will be truncated to the nearest full hour.
6. Press the CANCEL (C532i) or the BACK (C556i Navy) key to proceed to the U-Boot SW
display.
7. The display name "U-BOOT SW" will be displayed, press the OK key, the U-Boot software
part number will be displayed.
8. Press the CANCEL (C532i) or the BACK (C556i Navy) key to proceed to the U-Base SW
display
9. The display name "U-BASE SW" will be displayed, press the OK key, the U-Base software
part number will be displayed.
10. Press the CANCEL (C532i) or the BACK (C556i Navy) key to proceed to the Lower SW
display.
11. The display name "LOWER SW" will be displayed, press the OK key, the lower software
part number will be displayed.
C532i, C556i Navy Elliptical Fitness Crosstrainer
, keys to proceed a different
Page 9