Choosing A Language; Selecting A U.s. Standard Or Metric Display - Precor EFX 576i Owner's Manual

Choosing a Language

The EFX can display user prompts, text, and user entries in six
different languages. When the EFX is shipped from the factory, it is
set to display English. To change this setting, perform the following
steps:
1. At the Precor banner, press the following keys in sequence and
without pause:
RESET, 5, 6, 5, 1, 5, 6, 5
Numbers appear on the display as you press the associated key.
DIAGS appears in the center display and SET CLUB
PARAMETERS appears on the lower display followed by
SELECT LANGUAGE.
Use the arrow keys to choose between ENGLISH, DEUTSCH,
ESPANOL, FRANCAIS, NEDERLANDS, PORTUGUES, and
RUCCKIJJ.
Note: Programming prompts are not affected by language
selection. The prompts in this section continue to appear in
English.
2. When you are ready, press ENTER to move to the next program
or press RESET to return to the Precor banner.
Product Owner's Manual: Club Features
Selecting a U.S. Standard or Metric
Display
The EFX can display measurements in either METRIC or U.S.
STANDARD. The default factory setting is set to display U.S.
STANDARD. To change this setting, perform the following steps:
3. At the SELECT UNITS prompt, use an arrow key to select a unit
of measure (U.S. STANDARD or METRIC).
4. When you are ready, press ENTER to move to the next program
or press RESET to return to the Precor banner.
10