Efx Replacement Procedures; Replacing The Rear Covers; Replacing The Left And/Or Right Side Rear Cover; Replacing The Top Section Of The Rear Cover - Precor EFX 885 Service Manual

Section Ten - EFX Replacement Procedures
Procedure 10.1 Replacing the Rear Covers
WARNING
Before continuing with this procedure, review the Warning and Caution statements listed in Section One, Things You
Should Know.

Replacing the Left and/or Right Side Rear Cover

1. Remove the two screws at the rear of the rear cover.
2. Grasp the left side cover and rotate it clockwise to remove it.
3. Grasp the right side cover rotate it counterclockwise to remove it.
4. Reverse steps 2 and three to replace the left and ride side covers. Replace the screws removed in step 1 to
fasten the left and right side covers.

Replacing the Top Section of the Rear Cover

5. Remove the left and right side covers as described above.
6. Loosen, do not remove, the two screws that fasten the top cover to the frame upright.
7. Remove the two screws that fasten the top cover to the front cover and remove the top cover.
8. Set the replacement top cover in its mounting position and fasten it with the four screws removed in steps
2 and 3.
9. Replace the left and right side covers as described above.
Replacing the Rear Section of the Rear Cover
10. Remove the left and right side covers as described above.
Diagram 10.1.1 - External Power Supply Input Jack
11. Remove the top section of the cover as described above.
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
External Power
Supply
Input jack
EFX 885, 835, 825
Service Manual 20039-166
Page 138