Member (Zone Set View) - HP 6127XLG Blade Series Command Reference Manual

# Add an F_Port with fWWN 08:07:06:05:04:03:02:01 to zone alias za1 as both an initiator and a
target.
[Sysname-vsan2-zone-alias-za1] member fwwn 08:07:06:05:04:03:02:01
Related commands
display zone-alias
•
• zone-alias name

member (zone set view)

Use member to add a zone to a zone set.
Use undo member to remove a zone from a zone set.
Syntax
member zone-name
undo member zone-name
Default
No zone exists in a zone set.
Views
Zone set view
Predefined user roles
network-admin
Parameters
zone-name: Specifies an existing zone, a case-sensitive string of 1 to 64 characters. A zone name can
contain English letters (uppercase and lowercase), numbers, and special characters dollar sign ($),
minus sign (-), caret (^), and underscore (_), and it must start with an English letter.
Usage guidelines
Only FCF switches and VSANs operating in FCF mode support this command.
Examples
# Create zone z1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zone name z1
[Sysname-vsan1-zone-z1] quit
# Create zone set zs1 and enter its view.
[Sysname] zoneset name zs1
[Sysname-vsan1-zoneset-zs1]
# Add zone z1 to zone set zs1.
[Sysname-vsan1-zoneset-zs1] member z1
Related commands
display zoneset
•
• zone name
zoneset name
•
86