Configuring Zone Sets; Zone Set Tab View - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring Zones

Configuring Zone Sets

Perform this procedure to configure, change, enable, or disable zone sets. A zone
set is a group of zones that is activated or deactivated as a single entity across all
managed products in either a single switch or a multiswitch fabric. Only one zone
set can be active at one time. To configure zone sets:
1. Choose Configure from the navigation panel.
2. Choose the Zoning tab and the Zone Set tab. The Zone Set tab view displays
Figure 25: Zone Set tab view
3. Click Save and Activate Zoning Configuration. After the zone set name is
4. Click OK to save and activate the new zone set. The following message
Note:
96
(Figure 25).
validated, a confirmation dialog box displays.
displays: Your changes to the Zoning configuration have
been successfully activated. Note the following:
Rename zone set — To rename a zone set, type the new name in the
Zone Set Name field. Click Rename Zone Set. The new zone set name is
validated and changed.
If no name is specified, the name NEW_ZONE_SET is used.
Embedded Web Server User Guide