HP 6127XLG Blade Series Command Reference Manual page 128

Field
Tx type
Module type
Port number
Attached port WWNs
Port state
Description
Transmitter type of the port:
•
10GBASE-CX4.
•
10GBASE-ER 1550nm laser.
•
10GBASE-EW 1550nm laser.
•
10GBASE-LR 1310nm laser.
•
10GBASE-LW 1310nm laser.
•
10GBASE-LX4 WWDM 1300nm laser.
•
10GBASE-SR 850nm laser.
•
10GBASE-SW 850nm laser.
•
Electrical-EL.
•
Long wave laser cost reduced-LC(1310nm).
•
Long wave laser-LL(1550nm).
•
Short wave laser-SN(850nm).
Unknown is displayed for cable types other than the preceding ones.
Transceiver module type of the port:
•
GBIC with serial ID.
•
GBIC without serial ID.
•
GLM.
•
Other.
•
QSFP.
•
SFP-DWDM.
•
SFP with serial ID.
•
SFP without serial ID.
•
X2-DWDM
•
X2 Medium.
•
X2 short.
•
X2 Tall.
•
XENPAK.
•
XFP.
•
XPAX Medium.
•
XPAX short.
•
XPAX Tall.
Other is displayed for transceiver module types other than the preceding ones.
Unknown is displayed when the transceiver module type cannot be obtained.
Port index.
WWNs of connected ports.
If the nodes are registered through an NPV switch, there might be multiple
connected ports.
Current port state:
•
Online—The port link is connected.
•
Offline—The port link is not connected.
•
Unknown—Port state other than Online or Offline.
123