Zoneset Name - HP 6127XLG Blade Series Command Reference Manual

Default
The zone distribution and merge type is incomplete.
Views
VSAN view
Predefined user roles
network-admin
Usage guidelines
Only FCF switches and VSANs operating in FCF mode support this command.
This command can be configured only in basic zoning mode. In enhanced zoning mode, the zone
distribution and merge type is always complete, and this command is not supported.
Complete distribution (or merge) distributes (or merges) both the active zone set and zone database.
Incomplete distribution (or merge) distributes (or merges) only the active zone set.
The set distribution type applies to distribution operations triggered by the zoneset activate command
instead of the zoneset distribute command.
The set merge type applies to all merge operations.
Examples
# Set the zone distribution and merge type to complete.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zoneset distribute full
Related commands
display zone status
•
• zoneset activate

zoneset name

Use zoneset name to create a zone set and enter its view. If the zone set has been created, the command
leads you to the zone set view directly.
Use undo zoneset name to delete a zone set.
Syntax
zoneset name zoneset-name
undo zoneset name zoneset-name
Views
VSAN view
Predefined user roles
network-admin
Parameters
zoneset-name: Specifies the zone set name, a case-sensitive string of 1 to 64 characters. A zone set
name can contain English letters (uppercase and lowercase), numbers, and special characters dollar
sign ($), minus sign (-), caret (^), and underscore (_), and it must start with an English letter.
100