HP 6127XLG Blade Series Command Reference Manual page 14

Brief information on VFC interface(s):
Admin Mode: auto - auto; E - e port; F - f port; NP - n port proxy
Oper Mode: E - e port; F - f port; NP - n port proxy;
TE - trunking e port; TF - trunking f port;
TNP - trunking n port proxy
Interface Admin Admin Oper Status Bind
Mode Trunk Mode
Mode
Vfc1 F on
Table 3 Command output
Field
Admin Mode
Admin Trunk Mode
Oper Mode
Status
Bind Interface
# Display the descriptions of VFC interfaces.
<Sysname> display interface vfc brief description
Brief information on VFC interface(s):
Interface Description
Vfc1 Vfc1 Interface
Vfc2 Vfc2 Interface
Table 4 Command output
Field
Description
# Display information about and the causes of the VFC interfaces in physically down state.
Interface
TF UP TGE1/0/1 0102-0304-0506
Description
Configured mode of the VFC interface:
•
auto—Auto mode. VFC interfaces do not support the mode.
•
E—E mode.
•
F—F mode.
•
NP—NP mode.
Configured trunk mode of the VFC interface:
•
auto—Auto mode.
•
on—On mode. VFC interfaces support only the mode.
•
off—Off mode.
Operating mode of the VFC interface after the link layer negotiation:
•
E—An E_Port in an access VSAN.
•
F—An F_Port in an access VSAN.
•
NP—An NP_Port in an access VSAN.
•
TE—An E_Port in trunk VSANs.
•
TF—An F_Port in trunk VSANs.
•
TNP—An NP_Port in trunk VSANs.
•
--—No negotiation is initiated or the negotiation failed.
VFC interface status after the link layer negotiation, which can be UP or DOWN.
Binding information of the VFC interface, including the bound Ethernet interface and
the bound FCoE MAC address. If no binding information is configured for the VFC
interface, this field is blank.
9
Description
Description of the VFC interface.