Fspf Min-Ls-Arrival - HP 6127XLG Blade Series Command Reference Manual

Predefined user roles
network-admin
Parameters
value: Specifies the hello interval in the range of 1 to 65534 seconds.
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839.
Usage guidelines
Only FCF and FCF-NPV switches support this command.
The hello interval specifies the time between the hello packets sent periodically by the switch to discover
and maintain neighbor relationships.
The hello interval must be smaller than the dead interval and must be the same at the two ends of the link.
Examples
# Set the hello interval to 10 seconds for interface VFC 1 in VSAN 4.
<Sysname> system-view
[Sysname] interface vfc 1
[Sysname-Vfc1] fspf hello-interval 10 vsan 4
Related commands
fspf dead-interval

fspf min-ls-arrival

Use fspf min-ls-arrival to set the minimum LSR arrival interval for a VSAN.
Use undo fspf min-ls-arrival to restore the default.
Syntax
fspf min-ls-arrival value
undo fspf min-ls-arrival
Default
The minimum LSR arrival interval is 1 second.
Views
VSAN view
Predefined user roles
network-admin
Parameters
value: Specifies the minimum LSR arrival interval in the range of 0 to 60 seconds.
Usage guidelines
Only FCF switches and VSANs operating in FCF mode support this command.
The minimum LSR arrival interval specifies the time between receiving LSRs in a VSAN. Any LSR instances
of the same LSR received within this time are dropped. This helps avoid frequent SPF calculations caused
by LSDB updating.
68