Npv Commands; Display Npv Login - HP 6127XLG Blade Series Command Reference Manual

NPV commands

display npv login

Use display npv login to display the nodes on downlink interfaces and their mapped uplink interfaces.
Syntax
display npv login [ vsan vsan-id ] [ interface interface-type interface-number ]
display npv login [ vsan vsan-id ] count
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If you do not specify a VSAN, this
command displays information for all VSANs on the NPV switch. On an FCF-NPV switch, this command
displays information for only VSANs operating in NPV mode.
interface interface-type interface-number: Specifies a downlink interface by its type and number. If no
downlink interface is specified, this command displays information for all downlink interfaces on the NPV
switch.
count: Displays the total number of logged-in nodes on the NPV switch.
Usage guidelines
Only NPV and FCF-NPV switches support this command.
Examples
# Display the nodes on downlink interfaces and their mapped uplink interfaces on the NPV switch.
<Sysname> display npv login
Server
Interface VSAN FCID
Vfc2
Vfc3
# Display the number of logged-in nodes for VSAN 1 on the NPV switch.
<Sysname> display npv login vsan 1 count
Total entries: 2
# Display the number of logged-in nodes for each VSAN and the total number of logged-in nodes on the
NPV switch.
<Sysname> display npv login count
VSAN
1
2
Total entries: 3
Port WWN
1 0xae0002 20:00:00:23:89:c9:fc:05 10:00:00:23:89:c9:fc:05 Vfc1
1 0xae0003 10:00:00:00:c9:66:6b:60 20:00:00:00:c9:66:6b:60 Vfc1
Entries
2
1
Node WWN
102
External
Interface