Zone Rename - HP 6127XLG Blade Series Command Reference Manual

Predefined user roles
network-admin
Parameters
zone-name: Specifies a zone name, a case-sensitive string of 1 to 64 characters. A zone name can
contain English letters (uppercase and lowercase), numbers, and special characters dollar sign ($),
minus sign (-), caret (^), and underscore (_), and it must start with an English letter.
Usage guidelines
Only FCF switches and VSANs operating in FCF mode support this command.
Examples
# Create zone z1 and enter its view.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zone name z1
[Sysname-vsan1-zone-z1]
Related commands
display zone

zone rename

Use zone rename to rename a zone.
Syntax
zone rename old-name new-name
Views
VSAN view
Predefined user roles
network-admin
Parameters
old-name: Specifies the name of the zone to be renamed, a case-sensitive string of 1 to 64 characters.
This name can contain English letters (uppercase and lowercase), numbers, and special characters
dollar sign ($), minus sign (-), caret (^), and underscore (_), and it must start with an English letter.
new-name: Specifies the new zone name, a case-sensitive string of 1 to 64 characters. This name can
contain English letters (uppercase and lowercase), numbers, and special characters dollar sign ($),
minus sign (-), caret (^), and underscore (_), and it must start with an English letter.
Usage guidelines
Only FCF switches and VSANs operating in FCF mode support this command.
Examples
# Create zone z1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zone name z1
[Sysname-vsan1-zone-z1] quit
94