HP 6127XLG Blade Series Command Reference Manual page 84

Predefined user roles
network-admin
network-operator
Parameters
name zone-alias-name: Specifies a zone alias name, a case-sensitive string of 1 to 64 characters. A zone
alias name can contain English letters (uppercase and lowercase), numbers, and special characters
dollar sign ($), minus sign (-), caret (^), and underscore (_), and it must start with an English letter.
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839.
Usage guidelines
Only FCF and FCF-NPV switches support this command.
If you specify both name zone-alias-name and vsan vsan-id, this command displays information about a
single zone alias in a VSAN.
If you specify only vsan vsan-id, this command displays information about all zone aliases in a VSAN.
If you specify neither option, this command displays information about all zone aliases in all VSANs.
Examples
# Display information about all zone aliases in all VSANs.
<Sysname> display zone-alias
VSAN 1:
zone-alias name za1
fcid 0x111111 initiator
fcid 0x222222 target
pwwn 11:11:11:11:22:22:22:22
zone-alias name za2
fcid 0x111111
fwwn 12:11:11:11:22:22:22:22
VSAN 2:
zone-alias name za1
Table 29 Command output
Field
fcid
pwwn
fwwn
initiator
target
Related commands
member (zone alias view)
•
zone-alias clone
•
zone-alias name
•
zone-alias rename
•
Description
FC address of a zone member.
pWWN of a zone member.
fWWN of a zone member.
Role of a zone member. If no role is indicated, the member has both roles.
79