HP 6127XLG Blade Series Command Reference Manual page 57

<Sysname> display fc exchange link slot 2
Local_ID:EXID
0x060501:1024
# Display detailed information about the link exchange entries.
<Sysname> display fc exchange link verbose slot 1
slot: 1
protocol: 8
connection info: Local = 0x090801:1155 ,
PCB flags: 0x2
FC Class: FC_CLASS_F
connection state: ESTABLISHED
VSAN ID: 25
Table 17 Command output
Field
Local_ID:EXID/Local
Remote_ID:EXID/Remote
State/connection state
Slot/slot
Protocol/protocol
PCB flags
FC Class
Remote_ID:EXID
0x010001:1025
Description
FC address and exchange ID of the local end.
This field is ignored for a protocol exchange.
FC address and exchange ID of the peer end.
This field is ignored for a protocol exchange.
Connection state of the FC exchange:
•
PREPARE—The protocol exchange is successfully bound, or the link
exchange is waiting for the response packet.
•
LISTEN—The protocol exchange is monitoring the connection.
•
ESTABLISHED—The connection has been established.
•
ABTS—An ABTS was sent due to a connection timeout or error, and the
ABTS ACK is being expected.
•
BA_ACC—An ABTS was received, an BA_ACC is replied, and an ACC
ACK is being expected.
•
ABTS_ACK—An ABTS ACK was received, and a BA_ACC is being
expected.
•
CLOSED—The connection is closed.
IRF member device where the FC exchange is created.
FC protocol number.
FC exchange state flags:
•
0x1—The value 0 indicates the sending end, and 1 indicates the
replying end.
•
0x2—The value 0 means there is no initiative, and 1 means there is
initiative.
•
0x4—The value 1 indicates the first packet of the exchange.
•
0x8—The value 1 indicates that the exchange is waiting to be aged.
FC connection service level (FC_CLASS_3 requires no ACK):
•
FC_CLASS_1.
•
FC_CLASS_2.
•
FC_CLASS_3.
•
FC_CLASS_F.
•
FC_CLASS_6.
State Slot Protocol
ESTABLISHED 2 8
Remote = 0x050001:1089
52