Working-Mode - HP 6127XLG Blade Series Command Reference Manual

Examples
# Create VSAN 10 and enter its view.
<Sysname> system-view
[Sysname] vsan 10
[Sysname-vsan10]
# Change the name of VSAN 10 from its default to FCF-VSAN.
<Sysname> system-view
[Sysname] vsan 10 name FCF-VSAN
[Sysname-vsan10]
# Create VSAN 1 1 with a name of FCF-VSAN, and enter the view of VSAN 1 1.
<Sysname> system-view
[Sysname] vsan 11 name FCF-VSAN
[Sysname-vsan11]
# Restore the name of VSAN 1 1 to its default.
<Sysname> system-view
[Sysname] undo vsan 11 name
# Delete VSAN 1 1.
<Sysname> system-view
[Sysname] undo vsan 11
Related commands
display vsan status

working-mode

Use working-mode to configure the operating mode for a VSAN.
Use undo working-mode to restore the default.
Syntax
working-mode { fcf | npv }
undo working-mode
Default
The operating mode of a VSAN is NPV.
Views
VSAN view
Predefined user roles
network-admin
Parameters
fcf: Specifies the FCF mode.
npv: Specifies the NPV mode
Usage guidelines
Only FCF-NPV switches support this command.
23