Zone Clone - HP 6127XLG Blade Series Command Reference Manual

Parameters
activation-completed: Enables SNMP notifications for zone set activation or deactivation.
defaultzone-change: Enables SNMP notifications for default zone policy changes.
hardzone-change: Enables SNMP notifications for hard zoning status changes.
merge-failed: Enables SNMP notifications for merge failures.
merge-succeeded: Enables SNMP notifications for merge successes.
Usage guidelines
Only FCF and FCF-NPV switches support this command.
If you do not specify any keywords, this command enables all SNMP notifications for the zone module.
After you enable SNMP notifications for the zone module, the switch generates notifications for important
events of the zone module and sends the notifications to the SNMP module. For more information about
SNMP notifications, see Network Management and Monitoring Configuration Guide.
Examples
# Enable all SNMP notifications for the zone module.
<Sysname> system-view
[Sysname] snmp-agent trap enable fc-zone

zone clone

Use zone clone to create a zone by copying an existing zone.
Syntax
zone clone src-name dest-name
Views
VSAN view
Predefined user roles
network-admin
Parameters
src-name: Specifies the name of the source zone to be copied, a case-sensitive string of 1 to 64
characters. A source zone name can contain English letters (uppercase and lowercase), numbers, and
special characters dollar sign ($), minus sign (-), caret (^), and underscore (_), and it must start with an
English letter.
dest-name: Specifies the name of the destination zone, a case-sensitive string of 1 to 64 characters. A
destination zone name can contain English letters (uppercase and lowercase), numbers, and special
characters dollar sign ($), minus sign (-), caret (^), and underscore (_), and it must start with an English
letter.
Usage guidelines
Only FCF switches and VSANs operating in FCF mode support this command.
Examples
# Create zone z1.
<Sysname> system-view
89