Display Fc Ess - HP 6127XLG Blade Series Command Reference Manual

Related commands
domain configure enable

display fc ess

Use display fc ess to display the Exchange Switch Support (ESS) negotiation result, including the
following information:
• The capabilities of the local switch after the ESS negotiation.
The capabilities of the remote switch after the ESS negotiation.
•
Syntax
display fc ess [ vsan vsan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If you do not specify a VSAN, this
command displays the ESS negotiation results of all VSANs. On an FCF-NPV switch, this command
displays the ESS negotiation results of only VSANs operating in FCF mode.
Usage guidelines
Only FCF and FCF-NPV switches support this command.
Examples
# Display the ESS negotiation result in VSAN 2.
<Sysname> display fc ess vsan 2
ESS info of VSAN 2:
Domain: 210
Directory Server Capability:
Accept large name server objects: Yes
Accept small name server objects: No
Accept large + FC-4 Features name server objects: No
Accept small + FC-4 Features name server objects: No
Support receiving ACCept with 0 length: Yes
Fabric Controller Capability:
Support receiving the SW_RSCN Request: Yes
Fabric Configuration Server Capability:
Support basic configuration services: Yes
Support platform configuration services: No
Support topology discovery configuration services: Yes
Support enhanced configuration services: Yes
Enhanced Zone Server Capability:
Support enhanced zoning management: Yes
28