Display Fip-Snooping Flushing-Rules - HP 6127XLG Blade Series Command Reference Manual

Table 35 Command output
Field
Interface
FCF MAC
ENode

display fip-snooping flushing-rules

Use display fip-snooping flushing-rules to display the FIP snooping rules that are being flushed.
Syntax
display fip-snooping flushing-rules [ enode | fcf ] [ vlan vlan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
enode: Displays the ENode FIP snooping rules that are being flushed.
fcf: Displays the FCF FIP snooping rules that are being flushed.
vlan vlan-id: Specifies a VLAN by its ID in the range of 1 to 4094. If you do not specify a VLAN, this
command displays the FIP snooping rules that are being flushed for all VLANs.
Usage guidelines
Only the FIP snooping rules that have been flushed can filter FCoE frames. FIP snooping rules that are
being flushed cannot filter FCoE frames.
If you do not specify either enode or fcf, this command displays both ENode and FCF FIP snooping rules
that are being flushed.
Examples
# Display the FIP snooping rules that are being flushed.
<Sysname> display fip-snooping flushing-rules
VLAN 2:
FCF flushing-rules information:
Interface
FGE1/1/1
ENode flushing-rules information:
Interface
TGE1/0/1
VLAN 5:
FCF flushing-rules information:
Interface
Description
Ethernet interface connecting the Transit switch to the FCF switch.
FCoE MAC address of the FCF switch.
Number of ENodes attached to an FCF switch.
Source MAC/Mask
0000-1234-0212/48
Source MAC/Mask
0efc-0034-0202/48
Source MAC/Mask
Destination MAC/Mask
0efc-0034-0111/24
Destination MAC/Mask
0000-1234-0101/48
Destination MAC/Mask
110