Zoneset Rename - HP 6127XLG Blade Series Command Reference Manual

Usage guidelines
Only FCF switches and VSANs operating in FCF mode support this command.
Examples
# Create zone set zs1 and enter its view.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zoneset name zs1
[Sysname-vsan1-zoneset-zs1]
Related commands
display zoneset

zoneset rename

Use zoneset rename to rename a zone set.
Syntax
zoneset rename old-name new-name
Views
VSAN view
Predefined user roles
network-admin
Parameters
old-name: Specifies the name of the zone set to be renamed, a case-sensitive string of 1 to 64 characters.
This name can contain English letters (uppercase and lowercase), numbers, and special characters
dollar sign ($), minus sign (-), caret (^), and underscore (_), and it must start with an English letter.
new-name: Specifies the new zone set name, a case-sensitive string of 1 to 64 characters. This name can
contain English letters (uppercase and lowercase), numbers, and special characters dollar sign ($),
minus sign (-), caret (^), and underscore (_), and it must start with an English letter.
Usage guidelines
Only FCF switches and VSANs operating in FCF mode support this command.
Examples
# Create zone set zs1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zoneset name zs1
[Sysname-vsan1-zoneset-zs1] quit
# Rename zone set zs1 as zs2.
[Sysname-vsan1] zoneset rename zs1 zs2
Related commands
display zoneset
•
• zoneset name
101