HP 6127XLG Blade Series Command Reference Manual page 65

Syntax
display fspf neighbor [ vsan vsan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If you do not specify a VSAN, this
command displays information about all FSPF neighbors.
Usage guidelines
Only FCF and FCF-NPV switches support this command.
The FSPF neighbor information includes the following:
Neighbor domain ID.
•
Neighbor interface index.
•
Outgoing interface index of the local switch.
•
Remaining dead interval of the neighbor.
•
• Neighbor state.
Examples
# Display FSPF neighbor information.
<Sysname> display fspf neighbor
FSPF neighbor information of VSAN 1(01):
Interface
Vfc1
Table 23 Command output
Field
FSPF neighbor information of
VSAN
Interface
NbrDomain
IfIndex
NbrIfIndex
Dead Time
NbrDomain IfIndex
2 0x68
Description
FSPF neighbor information for a VSAN. The value in parentheses is the domain
ID in decimal of the local switch.
Interface name of the local switch.
Neighbor domain ID in decimal.
Outgoing interface index of the local switch.
Neighbor interface index.
Remaining dead interval of the neighbor. If no hello packet is received from the
neighbor after this interval, the neighbor state changes to Init.
NbrIfIndex Dead Time
0x68 00:01:06
60
State
Full