Fspf Min-Ls-Interval; Fspf Retransmit-Interval - HP 6127XLG Blade Series Command Reference Manual

Examples
# Set the minimum LSR arrival interval for VSAN 2 to 10 seconds.
<Sysname> system-view
[Sysname] vsan 2
[Sysname-vsan2] fspf min-ls-arrival 10

fspf min-ls-interval

Use fspf min-ls-interval to set the minimum LSR refresh interval for a VSAN.
Use undo fspf min-ls-interval to restore the default.
Syntax
fspf min-ls-interval value
undo fspf min-ls-interval
Default
The minimum LSR refresh interval is 5 seconds.
Views
VSAN view
Predefined user roles
network-admin
Parameters
value: Specifies the minimum LSR refresh interval in the range of 1 to 60 seconds.
Usage guidelines
Only FCF switches and VSANs operating in FCF mode support this command.
The minimum LSR refresh interval specifies the interval at which LSRs are refreshed. To reduce SPF
calculations and LSR flooding in a fabric caused by frequent LSR refreshing, the switch cannot refresh
local LSRs within this interval.
Examples
# Set the minimum LSR refresh interval for VSAN 2 to 10 seconds.
<Sysname> system-view
[Sysname] vsan 2
[Sysname-vsan2] fspf min-ls-interval 10

fspf retransmit-interval

Use fspf retransmit-interval to set the LSR retransmission interval for an interface in a VSAN.
Use undo fspf retransmit-interval to restore the default.
Syntax
fspf retransmit-interval value vsan vsan-id
undo fspf retransmit-interval vsan vsan-id
69