Zoneset Activate - HP 6127XLG Blade Series Command Reference Manual

Usage guidelines
Only FCF switches and VSANs operating in FCF mode support this command.
Examples
# Create zone alias za1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zone-alias name za1
[Sysname-vsan1-zone-alias-za1] quit
# Rename zone alias za1 as za2.
[Sysname-vsan1] zone-alias rename za1 za2
Related commands
display zone-alias
•
• zone-alias name

zoneset activate

Use zoneset activate to activate a zone set and distribute it to the entire fabric.
Use undo zoneset activate to delete the active zone set and distribute the deletion to the entire fabric.
Syntax
zoneset activate name zoneset-name
undo zoneset activate
Views
VSAN view
Predefined user roles
network-admin
Parameters
name zoneset-name: Specifies the zone set to be activated by its name, a case-sensitive string of 1 to 64
characters. This name can contain English letters (uppercase and lowercase), numbers, and special
characters dollar sign ($), minus sign (-), caret (^), and underscore (_), and it must start with an English
letter.
Usage guidelines
Only FCF switches and VSANs operating in FCF mode support this command.
Each VSAN can have multiple zone sets. However, only one zone set can be active at a time. It is called
the active zone set. The active zone set must contain at least one N_Port member and determines access
control over N_Ports.
In basic zoning mode, if the size of the zone set to be activated exceeds the system limit, the activation
fails. In either basic or enhanced zoning mode, the system prints a log message if the activation fails. To
ensure a consistent active zone set across the fabric, reactivate the zone set.
The distribution type specified by using the zoneset distribute full command applies to distribution
operations triggered by the zoneset activate command.
97