Fcoe Global Fcf-Priority; Vsan Commands; Display Vsan Port-Member - HP 6127XLG Blade Series Command Reference Manual

[Sysname-vlan2] fcoe fka-adv-period 20

fcoe global fcf-priority

Use fcoe global fcf-priority to set the system FCF priority.
Use undo fcoe global fcf-priority to restore the default.
Syntax
fcoe global fcf-priority priority
undo fcoe global fcf-priority
Default
The system FCF priority is 128.
Views
System view, VLAN view
Predefined user roles
network-admin
Parameters
priority: Specifies the system FCF priority in the range of 0 to 255. The smaller the value, the higher the
priority.
Usage guidelines
This command takes effect on all VFC interfaces operating in F mode.
On FCF or NPV switches, you can set the system FCF priority only in system view. On FCF-NPV switches,
you can set the system FCF priority only in VLAN view.
The system FCF priority is used in the fcf priority field in an unsolicited Discovery Advertisement.
An ENode selects the FCF switch with the highest priority from the FCF switches sending Discovery
Advertisements and sends a FLOGI request to it for login.
Examples
# Set the system FCF priority to 12 on an FCF or NPV switch.
<Sysname> system-view
[Sysname] fcoe global fcf-priority 12
# Set the system FCF priority to 12 in VLAN 2 on an FCF-NPV switch.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] fcoe global fcf-priority 12

VSAN commands

display vsan port-member

Use display vsan port-member to display the member interfaces of a VSAN.
19