Domain Configure Enable; Domain Restart - HP 6127XLG Blade Series Command Reference Manual

[Sysname] vsan 1
[Sysname-vsan1] domain auto-reconfigure enable
Related commands

domain configure enable

domain configure enable
Use domain configure enable to enable the fabric configuration feature in a VSAN.
Use undo domain configure enable to disable the fabric configuration feature in a VSAN.
Syntax
domain configure enable
undo domain configure enable
Default
The fabric configuration feature is enabled in each VSAN.
Views
VSAN view
Predefined user roles
network-admin
Usage guidelines
Only FCF switches and VSANs operating in FCF mode support this command.
To dynamically build a fabric, you must enable the fabric configuration feature on switches. After being
enabled with the fabric configuration feature, FCF switches exchange messages to select the principal
switch. Then, the principal switch dynamically assigns domain IDs to all switches in the fabric.
To statically set up a fabric, you must disable the fabric configuration feature on switches and manually
configure domain IDs for the switches.
Examples
# Enable the fabric configuration feature in VSAN 1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] domain configure enable

domain restart

Use domain restart to manually initiate a fabric reconfiguration in a VSAN.
Syntax
domain restart [ disruptive ]
Views
VSAN view
Predefined user roles
network-admin
36