HP 6127XLG Blade Series Command Reference Manual page 37

Port-type: 0x01(N)
Fabric-port-WWN: 30:30:30:30:65:33:64:6
Hard-addr: 0x000000
VSAN:1 FCID: 0x030200
Port-WWN(vendor): 20:00:00:5a:c9:28:c7:01
Node-WWN: 10:00:00:5a:c9:28:c7:01
Class: 3
Node-IP-addr: 192.168.6.171
FC4-types(FC4_features): NPV
Symbolic-port-name: NPV-Sysname:Vfc1
Symbolic-node-name: NPV-Sysname
Port-type: 0x01(N)
Fabric-port-WWN: 22:0a:00:05:30:00:26:1e
Hard-addr: 0x000000
--- Total 2 entries ---
Table 15 Command output
Field
FCID
Type
Port-WWN(vendor)
Node-WWN
Class
Node-IP-addr
FC4-types(FC4 features)
Description
FC address of the N_Port.
Port type registered by the node with the switch:
•
0x00(Unidentified)—No port type is registered.
•
0x01(N)—N_Port, which directly connects to the fabric.
•
0x02(NL)—NL_Port, which connects to the fabric through an
arbitrated loop.
•
0x03(F/NL)—F_Port or NL_Port.
•
0x7f(Nx)—N_Port, NL_Port, or F_Port, or NL_Port.
•
0x81(F)—F_Port, which connects to an N_Port.
•
0x82(FL)—FL_Port, which connects to an NL_Port.
•
0x84(E)—E_Port, which connects to an E_Port or B_Port.
•
0x85(B)—B_Port. The ports on a bridge that connect two E_Ports
are called B_Ports.
•
0xXX(Unknown)—Port types other than the preceding ones.
NOTE:
Typically, only N_Ports and NL_Ports will be registered by a node.
WWN of the N_Port (name of vendor).
WWN of the node.
Class of service.
IP address of the node.
FC4 type (feature) entries:
•
FC4 type—Includes SCSI-FCP, LLC/SNAP, SW_ILS, SNMP, GS3,
VI, and NPV.
•
Feature—Includes supporting Initiator, Target, or Initiator/Target.
32