Replacing A Wwn In The Zoning Database; Searching For A Zone Member - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B User Manual

Replacing a WWN in the Zoning Database

This procedure enables you to replace a WWN throughout the zoning database.
This is helpful when exchanging devices in your fabric, and easily maintaining
your current Configuration.
1. Access the Zone Administration window.
2. Select Edit > Replace a WWN. The Replace WWN... dialog box is
3. Enter the WWN to be replaced in the Replace field.
4. Enter the new WWN in the By field.
5. Click the OK button. The old WWN is replaced in the Zoning database by the

Searching For a Zone Member

Perform the following steps to search for a zone member.
1. Access the Zone Administration window.
2. Select Edit > Search Member.
3. Type the zone member name in the Member Name field.
4. Narrow the search by selecting one or more of the check boxes, such as Match
5. Click the Next button to begin the zone member search.
Web Tools Version 3.1.x/4.1.x User Guide
See "Accessing the Zone Administration
information.
displayed.
new WWN, including within any Alias or Zone where the old WWN was a
member.
See "Accessing the Zone Administration
information.
Case (optional).
Zone Administration
Window" on page 204 for more
Window" on page 204 for more
209