Rear Panel (Touchmix-16); Rear Panel (Touchmix-8); Aux 5 - QSC TouchMix-30 Pro User Manual

Rear Panel (TouchMix-16)

Rear Panel (TouchMix-8)

Rear Panel (TouchMix-16)
USB
1
1. USB 3.0, Type A – For attaching USB storage devices
2. RJ-45 – For use with accessories only. This is not an Ethernet connection.
3. Power Supply – Use the power supply delivered with the mixer, do not substitute.
4. Talkback microphone – Balanced female XLR
5. Main Right and Left output – Balanced male XLRs
6. Auxiliary outputs 1 through 6 – Balanced male XLRs
Rear Panel (TouchMix-8)
USB
1
1. USB 3.0, Type A – For attaching USB storage devices
2. K & Lock® Security Slot – Compatible with the MicroSaver Security Cable
3. Power Supply – Use the power supply delivered with the mixer, do not substitute.
4. Phones – Stereo 1/4" TRS. Line or headphone output is directed to this output when a channel Cue is activated.
5. Aux 3/4 – Stereo 1/4" TRS. Line or in-ear output. This output is wired in parallel with Aux 3 and 4 XLRs.
6. Main Right and Left output – Balanced male XLRs
7. Auxiliary outputs 1 through 4 – Balanced male XLRs
1 Drives must be formatted using the FAT32 fi le system. For best results use 7200 RPM, USB 3 hard drives or high-speed SSD. Drive performance is critical for recording. For more
information and to see a list of qualifi ed drives, visit qsc.com. At this time, the TouchMix does not support importing or re-importing digital audio fi les that have been created or
edited on another device.
2 The TouchMix supports "class compliant" USB MIDI devices. QSC has verifi ed proper operation with these USB MIDI footswitches: iCON G-BOARD and Logidy UMI3
1001108-01-C
Power Talkback Main Right
Accessory
Only
2 3 4
Power
Phones
®
2 3 4
Main Left Aux 6

Aux 5

5
1 , MIDI 2 foot switch, and Wi-Fi adapter.
Aux 3/4
Right Left
5 6
, MIDI foot switch, and Wi-Fi adapter.
1 2
32
Aux 4 Aux 3 Aux 2
6
4 3 2
7
Aux 1
1