Talkback / Noise - QSC TouchMix-30 Pro User Manual

Talkback / Noise

Talkback / Noise
This screen controls the routing and level of Talkback
and Noise.
1. Reset button – Restores factory defaults for the
Talkback / Noise Generator.
2. Assignment buttons – Select the destination for
the noise or talkback signals. Note that it is possible
to route talkback to the FX devices. This is very
useful when auditioning and selecting effects.
3. Talkback (Measurement) Mic – Adjusts the level
of the talkback signal to the assigned outputs. -Inf
(Infi nity) is off.
4. Enable (Talkback) – Touch to enable Talkback,
touch again to disable Talkback. Unlike the mixer's
hold-to-talk Talk button, this button is latching. When
enabled, the hold-to-talk button is illuminated. On
tablet devices, both Talk and Enable are latching.
5. Mic Phantom – Enables 48V phantom power to
the Talkback microphone input.
6. Noise Nenerator – Adjusts the level of the noise
signal to the assigned outputs. -Inf (Infi nity) is off.
7. Enable (Noise) – Touch to enable Noise, touch
again to disable Noise.
1001108-01-C
Talkback
Menu
Main Mix
Talkback / Noise Generator
L/R
Joe's Monitor
Select outputs for Talkback/Noise Generator
Aux 1
Aux 2
Aux 2
Aux 3
Aux 3 Aux 1 Aux 2 Aux 3 Aux 4 Aux 5
2
Aux 4
Joe's
Aux 2 Aux 3 Aux 4 Aux 5
Aux 4 Monitor
Aux 5
FX 1 FX 2 FX 3 FX 4 FX 5
Aux 5
2
Aux 6
FX 1 FX 2 FX 3 FX 4 FX 5
Aux 6
Aux 7
Aux 7
Aux 8
Aux 8
Aux 9
Talkback
(Measurement)
Aux 9
Mic
Aux 10
Aux 10
-40.0
Aux 11
3
Aux 11
Aux 12
Aux 12
4 5
Aux 13
Enable
Aux 13
Aux 14
Aux 14
107
Press
Menu
FX
Aux 6 Aux 7 Aux 8 Aux 9 Aux 10 Aux 11 Aux 12
Aux 6 Aux 7 Aux 8 Aux 9 Aux 10 Aux 11 Aux 12
FX 6
FX 6
Noise
Generator
-40.0
6
Mic
Phantom
7
48V
Enable
Touch
Talkback
Scene:
Default
1
Reset
Aux 13 Aux 14
Aux 13 Aux 14
L/R
2
Main