Fx Masters; Fx Master - Overview - QSC TouchMix-30 Pro User Manual

FX Masters

FX Master − Overview
FX Master – Overview
Provides a single-screen view of frequently used
controls and indicators for the FX channel.
1. Overview tab – Selects the Channel
Overview screen.
2. Preset – Shows the currently selected Preset for
this channel. Touch the + to change.
3. Effect – Shows the currently selected Effect type
for this channel. Touch the + to change.
4. Pre Fader / Post Fader button – Selects the Aux
mix pick-off point for the effect. Selections are: Pre
Fader – before the FX master fader, or Post Fader –
after the FX master fader.
5. Reset button – Sets all controls for the FX channel
to the factory default position.
6. Assigned To – Indicates the output assignments
channel (L/R Main, Sub Groups 1 - 8).
7. DCA – Indicates the DCA groups to which this
channel is assigned.
8. Mute – Indicates the Mute groups to which this
channel is assigned.
9. Parametric EQ graph – A graphic representation
of the equalization curve based on the EQ settings.
The trace dims to indicate that the EQ is
Out (disengaged).
• EQ Nraph vertical scale – Represents audio
level from -20 dB to +20 dB.
• EQ Nraph horizontal scale – Represents frequency from 20 Hz to 20 kHz.
10. EQ Out/In – Engages / disengages the equalizer for the FX channel.
11. Aux Sends –
• Displays the system numbers and user-defi ned names for the Aux channels.
• Adjustable sliders send signal to the associated Aux channel output.
• Mute indicates if the channel's send to an Aux is muted or not.
12. EQ Handles – Touch, hold, and drag to change the Frequency and Gain of the associated EQ band. The frequency band button must be
engaged to see the EQ Handles.
13. Low Cut Filter and Shelf fi lters 1 and 2 – These buttons engage or disengage the associated fi lter.
NOTE!: To adjust the following parameters, select the fi eld then use the Master encoder or the up/down nudge buttons on a
mobile device.
14. Nain, shelf fi lters 1 and 2 – Displays and adjusts gain (+/- 15 dB) of the frequency band.
15. Low-Cut fi lter frequency – Displays and adjusts the knee frequency for the high and low cut fi lters.
16. Shelf fi lters 1and 2 frequency adjustment fi elds – Displays and adjusts the center frequency for both parametric EQ bands.
17. Aux number & name – Displays the system numbers and user-defi ned names for the Aux mixes.
18. M – Indicates if the FX channel send to the Aux mix is muted. You can change this in the FX Masters Auxes tab.
1001108-01-C
Home
FX Masters
FX 1
Inputs 1-8
1
Main Mix
Overview EQ E ect
L/R
2 3
Joe's Monitor
Aux 1
Aux 2
6
Aux 2
Aux 3
9
Aux 3
Aux 4
12
Aux 4
1
Aux 5
Aux 5
Aux 6
Aux 6
13
Aux 7
Aux 7
Aux 8
15
Aux 8
Aux 9
Aux 9
Aux 10
Aux 10
Aux 11
Aux 11
Aux 12
Aux 12
Aux 13
Aux 13
Aux 14
Aux 14
75
Touch the
Touch an
FX Masters
FX Channel
Bank
Overview
Auxes Presets Setup
4 5
7
8
10 11
2
17
14
16
Touch the
Overview
Tab
Scene:
Default
Next
Prev
FX 1 Main
Cue Cue
18
L C R
FX Main
1 L/R
10 10 10 10
5 5
L
u u
L
F
5
G
5
48
10
10
20 20
0 0
40
40
∞ ∞
Mute Mute