QSC TouchMix-30 Pro User Manual page 45

External Control
3
Wi-Fi
4
Dimensions (HWD)
Weight
Line Voltage Requirements
Sampling Frequency
Internal Processing
Latency
THD
Frequency Response
Dynamic Range
Equivalent Input Noise
Residual Output Noise
Crosstalk
S/N Ratio
Maximum Input Level
Phantom Power
K & Lock® Security Slot 5
Included Accessories
1 All TRS connectors are 1/4 inch.
2 A list of drives that have been validated by QSC may be found at qsc.com. The hard-drive market is huge and continuously changing so there are many drives QSC has not validated
that will work. Always test a new drive before using it for a critical session. Minimum requirement is USB 3.0 HD, SSD or 7200 RPM, FAT32 format.
3 The TouchMix App requires iOS 7 or higher.
4 Use only the Wi-Fi adapter supplied with your mixer.
1001108-01-C
TouchMix-8
TouchMix Control Apps
for iPad® and Android tablets controls most mixer functions.
for iOS® and Android smartphones controls personal monitor mix, rec/play, user buttons.
Requirements
iPad, iPhone (iOS 6 or later) / Android device (5.0 or later)
USB Wi-Fi adapter included
56 mm x 333 mm x 245 mm (2.2" x 13.1" x 9.6")
4.3 lb (1.95 kg)
100 - 240 VAC, 50 - 60 Hz
Selectable 44.1kHz or 48kHz
32-bit fl oating point
<1.6msec, any input to any output
<0.005%, +4 dBu, 20 Hz - 20 kHz, unity gain, any input to any output
20 Hz - 20 kHz +/-0.5 dB, any input to any output
105 dB
-126 dBu
-86 dBu
-80 dB
-94 dB
+16 dBu (Mic/Line inputs, XLR), +26 dBu (Mic/Line inputs, TRS), +22 dBu (Stereo inputs)
48V, individually switchable per channel
Compatible with the MicroSaver Security Cable
USB Wi-FI adapter, Soft Carrying Case, Power Supply
TouchMix-16
58 mm x 360 mm x 291 mm (2.3" x 14.2" x 11.5")
5.9 lb (2.98 kg)
36