Record / Playback (Multitrack Usb Drive) - QSC TouchMix-30 Pro User Manual

Record / Playback (Multitrack USB Drive)

Record / Playback (Multitrack USB Drive)
Provides the controls to record and playback
multiple channels.
Record / Playback – Main Screen
IMPORTANT!: All USB memory devices
must be formatted as FAT32. Drive
performance is critical for recording. For
more information and to see a list of
qualifi ed drives, visit qsc. com.
NOTE!: At the end of a session, the
recording must be stopped using the Stop/
Pause control. Stopping the recording
writes a header fi le that is required for the
tracks to play.
NOTE!: All the standard channel controls
act as they do regardless of record /
playback status. For example, if you Mute
the channel that is recording, the output
gets muted, but recording of the
input continues.
1. Input Channel controls – All input channel controls function as they do from the Home screen.
2. Arm – Arms the channel to be recorded when the Record button is pressed. Displays here and on the Home screen .
3. Track – When engaged, selects a recorded track as the audio source for the channel instead of the analog input.
4. USB Session – Displays the name of the active multi-track recording session.
5. Transport controls – Standard transport controls; Return to Start, Rewind, Play, Forward, Pause and Record.
6. Total record time counter – The total length of the recording in HH:MM:SS. If recording is in progress, this number grows until the recording
is ended.
7. Recording Mode – Displays a panel for selection of Stereo MP3, Multitrack or DAW (see the MP3 Audio Player and DAW topics).
8. Set – Moves the Locate pointer to the position of the Play pointer.
9. No To – Moves the Play pointer to the position of the Locate pointer.
10. Play pointer – Indicates current record/playback position.
11. Locate pointer – Marks a location on the Time Line. The locate pointer may be moved by dragging on screen, by selecting and turning the
Master Encoder or using the Set button.
12. Progress indicator – Represents the session time line.
NOTE!: Due to FAT23 fi le size limitations, the max continuous recording time is roughly three hours. A warning message is displayed
10 minutes before the limit is reached. To continue recording, pause and then resume. It is not necessary to create a new session.
(see "Recording Directory Structure" for more).
13. Time code display – Displays position of the Play pointer in HH:MM:SS. Maximum record time is determined by the capacity of the attached
hard-disc drive.
14. Recording Setup – Navigates to the Recording Setup screen.
1001108-01-C
Recording
Rec/ Multitrack
Play
Mode
USB Drive
99
Touch
Press
Recording
Rec/Play
Mode
Touch
Multitrack
USB Drive