Aux Mix On Faders - QSC TouchMix-30 Pro User Manual

Aux Mix on Faders

Aux Mix on Faders
The Aux Mix on Faders provides a view of a single Aux Mix
(or Aux Bus) with large faders. By selecting different fader
banks, you can see and adjust everything that is sent to
the selected Aux bus.
Here is an example.
1. Select fader bank Inputs 1–8 (1)
2. Select Aux 1 (2)
3. The faders you see (6) are the Aux Sends from Input
channels 1–8 going to Aux Mix 1.
4. Select FX Masters (1).
5. The faders you see are the Aux Sends from the FX
Masters going to Aux Mix 1.
6. Notice that when you select Aux Mix 1 some of the
small white faders in the fader banks are missing.
These channels are not available to the selected Aux
Mix. The channels that are not available to the Aux Mix
are the Aux channels.
TouchMix-30 Pro
The TouchMix-30 Pro is a little different. For Aux Mixes
1–8 it is the same as TouchMix-8 and TouchMix-16.
However, if you select Aux Mix 9–14 you will notice that
Aux channels 1–8 are now available. This means that you
can send an already-mixed Aux output (any or all of Aux
Mixes 1–8) to one or more of the Aux Mixes 9–14.
TouchMix-30 Pro Auxes are doing double duty as Mix Matrices. A Mix Matrix lets the operator take existing main, auxiliary and sub group mixes and create
a new mix from them.
Summary
Here's what can be mixed on to the Auxes:
• Auxes 1–8!: All TouchMix models – All Inputs, all Effects / TouchMix-30 Pro Only – Main L/R, all Sub Groups
• Auxes 9–14!: (TouchMix-30 Pro Only) All Inputs, all Effects, Main L/R, all Sub Groups, Auxes 1–8
NOTE!: To add the Main L/R to an Aux Mix, select Aux Out 9–14 fader bank.
Control Descriptions:
1. Fader Bank selectors – Touch a Fader Bank number to display the selected Aux Mix for the selected Fader Bank.
2. Aux Mix select buttons – Select an Aux Mix to display that Aux Mix for the selected Fader Bank.
3. Channel select and friendly name – Touch a channel selector to access all the details for that channel. You can change this name in the
channel's Setup screen.
4. Cue buttons – Sends signal from the channel input to the Phones and/or Monitor outputs.
5. System Channel Name labels – 1 Mic, 2 Mic, and so on, do not change.
6. Aux Send faders – Adjusts the audio level of the selected channel to the selected Aux Mix. Color coded to match the Aux Mix Select buttons.
7. Channel Input meter – Displays the pre-fader / post-compressor & gate audio level of the channel.
8. Aux Mix Master fader – Adjusts the overall level of the selected Aux Mix. This level includes all Aux Sends to this Aux Mix. Changes when a
different Aux Mix is selected.
9. Mute buttons – Mutes the Aux Send only for the associated channel.
• Orange: Indicates that the channel is muted from the Main L/R mix, a mute group or a DCA group.
• Red: Indicates the channel is muted for the selected Aux mix.
1001108-01-C
Inputs 17-24 Aux 1
Aux 1
Inputs 1-8
Main Mix
L/R
Aux 1
3
Aux 1
In 1 In 2 In 3
Aux 2
Aux 2
4
Aux 3
Aux 3
Aux 4
Aux 4
5
Aux 5
1 2 3
Aux 5
Aux 6
Aux 6
2
Aux 7
Aux 7
Aux 8
Aux 8
Aux 9
Aux 9
Aux 10
Aux 10
Aux 11
Aux 11
Aux 12
Aux 12
Aux 13
Aux 13
Aux 14
Mute Mute Mute
Aux 14
116
Press Select a
Home Fader Bank
1
In 4 In 5 In 6 In 7
4 5 6 7
6
7
Mute Mute Mute Mute
Select an
Aux Mix
Scene:
Default
Aux 1
In 8
8
8
9
Mute