2-Trk Playback; 2-Trk Playback - Overview - QSC TouchMix-30 Pro User Manual

2-Trk Playback

2-Trk Playback
2-Trk Playback – Overview
2- Track playback controls a digital, stereo audio input signal. Depending on the Recording Mode selected, this signal may be from a USB multi-
track session, a DAW (TouchMix-30 Pro only) or from MP3 fi les stored on the root directory of a USB drive.
2-Trk Playback − Overview
Provides a single-screen view of frequently used
controls and indicators for the MP3 Audio Player
and the 2-Track PB channel. The settings made here
affect both MP3 and 2-Track audio.
1. Overview tab – Selects the Channel Overview
screen.
2. Preset – Shows the currently selected Preset for
this channel. Touch + to change the Preset.
3. Reset button – Sets all controls for the
playback channel to the factory default position.
4. Assigned To – Indicates the output assignment
channel L/R Main or not. Change in Setup.
5. Parametric EQ graph – A graphic
representation of the equalization curve based on
the EQ settings. The trace dims to indicate that
the EQ is Out (disengaged).
• EQ Nraph vertical scale – Represents
audio level from -20 dB to +20 dB.
• EQ Nraph horizontal scale – Represents
frequency from 20 Hz to 20 kHz.
6. Out/In – Engages / disengages the equalizer for
the MP3 and 2-Track PB channel.
7. EQ Handles – Touch, hold, and drag to change
the Frequency and Gain of the associated EQ
band. The frequency band button must be
engaged to see the EQ Handles.
8. Mute – Indicates the Mute groups to which this
channel is assigned.
9. Aux Sends –
• Displays the system numbers and user-
defi ned names for the Aux channels.
• Adjustable sliders send signal to the
associated Aux channel output.
• Mute indicates if the channel's send to an Aux is muted or not.
10. Low Cut Filter and Shelf Filters 1 and 2 buttons – These buttons engage or disengage the associated fi lter.
NOTE!: To adjust the following parameters, select the fi eld then use the Master encoder or the up/down nudge buttons on a
mobile device.
11. Frequency, Low-Cut Filter – Displays and adjusts the knee frequency for the low cut fi lter.
12. Nain, Shelf Filters 1 and 2 – Displays and adjusts gain (+/- 15 dB) of the shelf fi lter.
13. Frequency, Shelf Filters 1and 2 – Displays and adjusts the frequency for both shelf fi lters.
14. Aux number & name – Displays the system numbers and user-defi ned names for the Aux mixes.
15. M – Indicates if the FX channel send to the Aux mix is muted. You can change this in the FX Masters Auxes tab.
1001108-01-C
Touch Touch
Press
Recording Multitrack
Rec/Play
Mode USB Drive
Recording Stereo MP3
Rec/
Play
Mode USB Drive Playback
Recording
Rec/ Multitrack
Play
Mode USB Drive
1
Main Mix
Overview EQ E ect
L/R
2
Joe's Monitor
Aux 1
Aux 2
4
Aux 2
Aux 3
5
Aux 3
Aux 4
Aux 4
1
Aux 5
Aux 5
Aux 6
Aux 6
10
Aux 7
12
Aux 7
Aux 8 11 13
Aux 8
Aux 9
Aux 9
Aux 10
Aux 10
Aux 11
Aux 11
Aux 12
Aux 12
Aux 13
Aux 13
Aux 14
Aux 14
68
Touch
Press Rec/
Recording
Play
Mode
OR
Touch Touch
OR Multitrack Stereo
DAW In / 2–Trk
Overview
OR
Stereo In/2-Trk
OR
Multitrack
OR
DAW
Auxes Presets
6
7
2
14
Touch Touch
Stereo MP3 Overview
Touch Touch
2-Trk PB Overview
2-Trk PB Overview
Scene:
Setup Default
Prev Next
3
2-Trk PB Main
Cue Cue
8
L C R
9
Playback Main
PB L/R
10 10
10 10
5 5
L
u
u
L
AF
5
G
15
5
48
10
10
20
20
0 0
40
40
∞ ∞
Mute Mute