QSC TouchMix-30 Pro User Manual page 55

Input Channel – Nate
Input Channel − Nate
The Gate passes audio above a set Threshold, and
attenuates audio below the Threshold.
1. Nate tab – Selects the Gate Screen.
2. Nate In switch – Engages or disengages the Gate.
3. Simple button – Turns Simple mode on and off.
Hides all controls except:
• Gate In button
• Simple button
• Reset button
• Gating knob
4. Reset button – Sets all the Gate controls to their
factory default position.
5. In meter – RMS input level
6. N.R. meter – Gain Reduction – indicates how much
the signal is being reduced by the Gate.
7. Out meter – Output level
8. Threshold slider – Sets the point at which the
Gate allows audio to pass.
9. Nate graph – When the Gate is engaged, the trace
turns green.
• Threshold (A)
• Attack time (A-B)
• Release time (C-D)
• Attenuation Level (E).
10. Attenuation slider – Sets the amount of attenuation applied to the output when the signal is below the Threshold.
11. Attack slider – Adjusts how quickly the gate reacts to a signal that exceeds the threshold.
12. Release slider – Adjusts how quickly the Gate attenuates the audio when signal falls below threshold.
13. Hold knob – Sets the minimum time the Gate stays open once it is opened, and the length of time the Gate stays open after the input level
drops below the Threshold.
1001108-01-C
Home
Inputs 1-8
In 1 Gate
Inputs 1-8
1
2
5 6
9
8
A B
C
11
13
46
Touch
Touch a
an Input
Channel
Bank
3 4
7
10
E
D
12
Select
Gate
Tab