Mp-M Hardware; Front Panel; Rear Panel - QSC MP-M80 User Manual

MP-M Hardware

Front Panel

NOTE!: MP-M80 is shown.
1. CUE – Headphones, 3.5 mm, stereo
2. USB – USB-A (rear panel – 1, front panel – 1), fi rmware & confi guration uploads, USB Wi-Fi
3. STATUS –
Action
Off
On
Slow Blink
SOS Blink
4. PO ER –
On Off

Rear Panel

NOTE!: MP-M80 is shown.
1
1. INPUTS (MIC/LINE) – Mic / Line Inputs, balanced, 12 V Phantom power, MP-M80 has 8 inputs, MP-M40 has 4 inputs, 6-pin Euroblock
connectors.
2. INPUTS (MONO SUMMINN) – RCA Pairs, summed to mono, MP-M80 has 8 pairs, MP-M40 has 4 pairs.
3. OUTPUTS (LINE LEVEL) – Balanced, Line Level, MP-M80 has 8 line level outputs, MP-M40 has 4 line level outputs, 6-pin Euroblock
connectors.
4. MUSIC ON HOLD – Transformer-balanced, 3-pin Euroblock connector
5. USB – USB-A (rear panel – 1, front panel – 1), fi rmware & confi guration uploads, USB Wi-Fi
6. Ethernet – RJ45 For connecting to a network, wired and/or wireless.
7. NPI – 2 Inputs, Euroblock
8. MFC – MP-MFC ports, up to 4 MFC's per connection, 2 RJ45 connectors
9. AC Mains – power connection, 100-240 V, ~85 W, 50/60 Hz
CAUTIONG!: If AC power is removed, wait for 5 seconds before reapplying the AC power.
TD-001578-01-A
Appearance Defi nition
Booting
Firmware Upgrade
Upgrade Failure
2
2
1
OK
5
3
7
4
6
3
2 4
8 9